Source: dpp-dopc.context.jsonld
Locally Defined Terms
- dopc - The Declaration of Performance and Conformity.
- declarationCode - Unique identifier of the declaration.
- dateOfIssue - The date the declaration was issued.
- tensileStrengthAdhesion - Classification of adhesion.
- modulusOfElasticityInCompression - Group of properties regarding modulus of elasticity in compression.
- method1 - Modulus of elasticity measured using Method 1.
- capillaryAbsorption - Capillary absorption rate.
- dangerousSubstances - Statement on dangerous substances.
- shrinkageAndExpansion - The shrinkage and expansion of the material.
- slipSkidResistance - Group of properties regarding slip/skid resistance.
- laboratory - Measurements in the laboratory.
- thermalExpansion - Change in volume in response to a change in temperature.
- declaredUnit - The quantity of a construction product for use as a reference unit in an EPD for an environmental impact assessment.
- functionalUnit - The quantified performance of a product system for use as a reference unit.
- referenceServiceLife - The reference service life in years.
- chlorideContent - Group of properties regarding chloride content.
- 21DegC - Maximum percentage by mass.
- bondStrength - Group of properties regarding bond strength.
- 28Days - Bond strength measured after 28 days.
- thermalCompatibility - Group of properties regarding thermal compatibility.
- wetSurface - Thermal compatibility measured on wet surface.
- resistanceToCarbonation - Group of properties regarding carbonation resistance.
- 21DegC - Resistance to carbonation at 21 degrees Celsius.
- reactionToFire - The classification of the product's contribution to fire (Euroclass).
- avcpSystem1 - Reaction to fire under AVCP System 1.
- avcpSystem2 - Reaction to fire under AVCP System 2.
- avcpSystem3 - Reaction to fire under AVCP System 3.
- avcpSystem4 - Reaction to fire under AVCP System 4.
- elasticRecovery - Group of properties regarding elastic recovery.
- methodA - Reference to Method A.
- 25Percent - Elastic recovery using Method A at 25% elongation.
- 60Percent - Elastic recovery using Method A at 60% elongation.
- 100Percent - Elastic recovery using Method A at 25% elongation.
- methodB - Reference to Method B.
- 25Percent - Elastic recovery using Method B at 25% elongation.
- 60Percent - Elastic recovery using Method B at 60% elongation.
- 100Percent - Elastic recovery using Method B at 100% elongation.
- methodA - Reference to Method A.
- resistanceToFlow - Group of properties regarding resistance to flow.
- procedureA - Reference to Procedure A.
- 5DegC - Flow resistance measured using Procedure A at 5°C.
- 50DegC - Resistance to flow using Procedure A at 50 degrees Celsius.
- 70DegC - Flow resistance measured using Procedure A at 70°C.
- procedureB - Reference to Procedure B.
- 5DegC - Flow resistance measured using Procedure B at 5°C.
- 50DegC - Flow resistance measured using Procedure B at 50°C.
- 70DegC - Flow resistance measured using Procedure B at 70°C.
- procedureA - Reference to Procedure A.